Most parameters are common to show buttons, color en location off sounds.

Warn Time=time that warning is in the picture (eg Sun in Viewer)

Range check=Whether or not to indicate that the object is in range. (in telescope)

Auto_position= Out of order

Object_File=file with objects (nebula systems etc)

Hide_NonVisble=do not display objects below the horizon in the list

Long=longitude.

TCP_show=connection LED visible or not visible

T_off= out of order

Send_Time=time interval to send tcp data (to stellarium / ASCOM)

Bluetooth=bluetooth port (com ??)

TCP_Server=whether or not TCP server (for communication stell./ASCOM)

TCP_Port=server port for compromise TCP server

TCP_MaxConn=maximum allowed connections

TCP_Clients=ipaddress of authorized clients

Run_priority= priority with which the process runs in the OS (1..4)

PID_P= proportional value of PID controller

PID_I= Integral value of PID controller

PID_D= Diferential value of PID controller

Cycle_Time= time of the rule ciclus (PID)

Integ_rng= range where the integral controller is switched off

Lock_in_range= range in arc seconds within which indicated in position

Lock_out_range= range in arc seconds beyond which indicated not in position

Manual_speed= speed values for manual operation (like no auto_speed)

Man_auto_speed= speed of movement runs on the longer a button is pressed

Man_ramp_up=The amount of speed increase for manual operation

Equatorial=equatorial or azimuthal mount

Init_on_start=start program with initialization

Sun_Warn=warning for range approach Sun in arc seconds

Sun_Avoid=whether or not to avoid the Sun.

Init_stat=status when starting the program (tracking, stop, ...)

Merid_Flip_Enable=Whether or not to perform meridian flip (automatically)

Merid_Flip_Range=range past south before flip becomes active

Flip_reserve=flip rotation reversible

Refrac_Enable=whether or not to apply Refraction correction

ReEfract_Temp=temperature for refraction calculation

Refrac_Press=air pressure for refraction calculation

USB_vendor_ID=USB code from FreeGo2

Setup_allign=not yet in use

Setup_done=whether or not setup is performed, not yet in use

Setup_Range=detect range for motion before setup, not yet in use

Park_Az=park home position (azimuth)

Park_Alt=park home position (Altitude)

Close After park=whether or not to close the program when the system is parked.

Park_Range=range in arc seconds for detection park home position

Re=test parameter for our nerds.